- Products have slow start function, no additional installation of slow starter.
- 2. 4g bluetooth remote control and receiver for kids powered ride on car.
- 7pins single-sided socket Both version can be replaced with each other
- There are many old and new versions of the product but the function is the same.
- Long press the top white button to match frequency before use
Ⅰ. Normal use
1. Bluetooth remote control with slow start function
2. Remote control or manual press the emergency stop button, the vehicle stops moving
3. Remote control does not use 15 seconds after the automatic cut off the battery power consumption.
Ⅱ. The first use (or replace the battery) need to matching frequency
Step 1. Install two AAA 1.5V batteries, (note the positive and negative polarity inside the battery chamber), and finally close the battery cover, indicator will flash three times indicates that the battery is installed correctly.
Step 2. Press and hold the frequency key(car select) for about 2 seconds and the indicator will flash
Step 3. Turn on the power supply of the car and the indicator will turn off
Step 4. If the matching frequency is unsuccessful (indicator not turn off), please turn off the power supply and repeat steps 2 and 3.
Ⅲ. Normal use
1.The frequency key in the initial use and replacement of batteries need to operate once.
2.Make sure that the remote control is not exposed to moisture or moisture, as this may adversely affect performance or may not work
Ⅳ. Warnings
1.Old or different types of batteries can not be mixed
2.2. Install the battery according to the positive and negative markings in the battery compartment
3.When the remote control is not used for a long time, please remove the battery
4.Waste batteries on the recycling of used batteries in the trash, so as not to cause environmental pollution
